Raw Material Preparation
Cold-rolled steel substrate is prepared and cleaned to promote metallic coating adherence.
Steel Coil Manufacturing
And Applications
Explore RhinoGuard aluminium-zinc coating, RhinoShield colour coating, operations and material applications. Follow the original line diagrams and connect each manufacturing route with the finished product and its intended use.
Explore this page
The Protection Starts
With The Substrate
RhinoGuard manufacturing follows a continuous aluminium-zinc alloy coating route. Preparing the steel surface, controlling the metallic coating and reviewing the finished strip condition are connected steps in producing a consistent coated substrate. The A through R diagram shows the line sequence so customers can follow the manufacturing route.
Continuous Hot-Dip Coating
Steel passes through a controlled aluminium-zinc alloy bath.
Coating Regulation
Air knives and process controls regulate coating mass and uniformity.
Cooling And Finishing
Coated strip is cooled, inspected and recoiled for downstream applications.
Preparation, Coating
And A Controlled Finish
RhinoShield colour coating brings substrate preparation, coating application and curing into a continuous process. The line diagram groups the equipment into Entry, Pre-treatment, Coating & Curing, and Exit sections. The stage labels support discussion of the line layout and processing sequence.
Substrate Selection
Galvanized steel, Aluzinc or aluminium is selected according to the finished material requirements.
Pre-Treatment And Primer
Surface preparation and coating application support adhesion and corrosion performance.
Topcoat And Curing
Controlled coating and curing produce the required colour and surface finish.
Quality Checks And Recoiling
Colour, adhesion, mechanical performance and finished coil condition are reviewed.
Operations From Raw Material To Dispatch
The two UAE operations have complementary roles. The Umm Al Quwain facility is associated with RhinoGuard Aluzinc coated steel, while Dubai Industrial City is associated with RhinoShield pre-painted steel and aluminium. Connecting the enquiry to the right operation helps align the substrate, finish and dispatch requirements from the outset.
Production operations span raw material procurement, substrate preparation, coating, finishing, inspection, inventory management and dispatch. Material planning supports customized and high-volume coil supply.
Precision engineering and optimized workflows support consistent quality, uniform coatings and a controlled surface finish. Slitting, cutting and surface treatment help achieve the required coil dimensions and material performance. Order planning accommodates customized sizes, coating weights and packaging requirements.
On-site inventory, real-time inventory monitoring and tracking systems support efficient order fulfilment. Coordinated logistics and scheduled dispatch help reduce lead times and keep custom and high-volume coil deliveries aligned with agreed specifications and project requirements.
Rhino Steel Industries LLC
RhinoGuard / Aluzinc coated steelAluzinc-coated steel coil manufacturing operation.
Facility contactsRhino Steel Industries & Coating LLC
RhinoShield / Pre-painted metal coilsColour-coating operation for galvanized steel, Aluzinc and aluminium substrates.
Facility contacts
The Application
Defines The Requirement
Application requirements guide product selection before manufacture. Exterior envelopes require consideration of weather exposure and detailing; fabricated components also require attention to forming and assembly. The range of uses below identifies material applications, rather than a claim that one coating is suitable for every service environment.
Rhino coated metal products serve architectural envelopes, construction products and fabrication applications.
Roofing
Claddings
Facades and awnings
K-span buildings
Composite panels
Architectural cladding
Linear ceilings
False ceiling tiles
Cold storage
Food storage
Interior ceilings
Rolling shutters
Kitchen cabinets
Lift interiors
Automotive and trailer manufacturing
Door and window profiles
Coated Metal In Projects
For a project enquiry, identify the component being manufactured, its intended location and the process used to form or assemble it. These details help connect a broad application such as roofing or HVAC to a more precise substrate, coating and dimensional specification.
Applications include industrial roofing, commercial cladding, building envelopes and precision-formed components. Specification suitability depends on substrate, paint system, environment and forming requirements.
Explore roofing and cladding, cold storage, agriculture, HVAC and automotive applications
Product Dimensions And Order Requirements
Finished coil information is presented on the individual product pages so customers can compare the same set of dimensions and coating designations. Use those specifications together with the intended application and coating system, then confirm order-specific requirements with the sales team.
For finished coil grades, thicknesses, widths, coating designations, weights and internal diameter, consult the relevant product specifications.
Understanding The Manufacturing Routes
Are the two manufacturing diagrams the same process?
No. The A through R diagram represents the aluminium-zinc coating route. The detailed colour-coating diagram represents the Entry, Pre-treatment, Coating & Curing and Exit sections of the pre-painted line. The diagrams show two distinct manufacturing routes and their equipment sequence.
Where are finished product dimensions listed?
Use the RhinoGuard and RhinoShield product pages for the finished coil specifications. Those pages bring the grade, thickness, width, coating designation and coil dimensions together for the finished material.
Connect Your Application To The Right Process
Describe your component, fabrication route and exposure conditions so the team can discuss an appropriate coated coil specification.
Discuss Your Requirements